24V Lithium-ion LiFePo4 Battery 150Ah (3.6KWh) - New Energy

The Nenergy 24V 150Ah LiFePo4 Single Battery Module with Total Usable Energy 3.5 kWh is designed for Floor Standing or Wall Mount Installations that is perfect for small to medium residential or office installations with a proven Lithium Iron Phosphate (LifePO4) solution that offers a low internal resistance with excellent continuous high current discharge performance and great lifecycle of more than 6000 at 80% DOD. Design To Work Perfectly with Inverters Up To 3.5KVA.


Highlights
Nenergy 25.6V 150Ah LiFePo4 Single Battery Module
Floor Standing and Wall Mount Installation -Brackets and Cables Not Included
Nominal Voltage: 25.6V
Working Voltage Range 24V
Rated Capacity (3HR):150Ah
Total Usable 3.5 kWh
Maximum Continuous Discharging Current: 50-100A
Maximum Continuous Charging Current: 50A
Working Voltage Range 21.6V-28V
Built In Protection -Over-Charge, Over-Discharge, Over-Temperature

Specifications

Description Nenergy 24V 150Ah LiFePo4 Single Battery Module
Rated Capacity (3HR): 150Ah
Nominal Voltage 25.6V
Working Voltage Range 24V
Discharge Cut-off Voltage: 21.6V

Cells: New Li-Ion Prismatic Cells
Design Life: -/+ 15 Years
Cycle Life @ 1C: +/-4000 Cycles @ 100% DOD, Above 6000 cycles @ 80% DOD
Protection: Electronic Circuit Breaker, Voltage Protection, Current Limiting
Weight: Approx. 47.5kg

Best Practices to Prolong Battery Life:
- Never discharge your battery below the recommded Depth of Discharge (DOD). 50% for GEL and 80% for Lithium Ion.
- Ensure your battery and the terminals to the Inverter are clean and tightly fafstened.
- Consistently drawing current from a battery without letting it fully charge degrades the battery quicker.
- Use batteries at an ambient temperature of 25 degress Celcius.
- Ensure good ventilation.


Please make sure that your inverter/charger works well with GEL batteries before buying. Warranty falls off if wrong or incompatible inverter/charger is used.

Warranty: 24 Months Repair Warranty

Warranty Condition:

A certified electrical wireman or master electrician with a current Department of Labor registration is required to install all inverters and batteries. Once installed, a current electrical certificate of compliance (COC) for the installation of the solar or backup system is required. The installation needs to adhere to SANS 10142 in its entirety. If a warranty claim is filed without installation images, a current COC, and documentation that the item was installed by a licensed wireman or master electrician, it may be denied and become void.