This item has closed with no items sold
View other items offered by MacSell5940

Similar products

R35 shipping
Five Star, 3.5KVA, 3.5KW, MPPT 24V Solar Hybrid Inverter
R7,800.00
R35 shipping
MUST 3kva Hybrid Inverter- No Box
R3,900.00
R35 shipping
39% OFF
5KW Navsolar combo - 5kwh Lithium battery + 5kw Inverter + remote monitoring, 1C rated, R19 990
R19,990.00 R32,990.00
R35 shipping
ESENER 3KVA Hybrid Inverter with 2.56kWh Lithium Battery - 24V System
R13,900.00
ECCO Inverter and Battery Combo 5.5KVA Solar Hybrid Inverter & 4.8KWH Lithium Battery

ECCO Inverter and Battery Combo 5.5KVA Solar Hybrid Inverter & 4.8KWH Lithium Battery

15 were available / new
R32,500.00
Shipping
R35.00 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30.00 surcharge. This will be calculated at checkout if applicable.
Check my rate
The seller has indicated that they will usually have this item ready to ship within 1 business day. Shipping time depends on your delivery address. The most accurate delivery time will be calculated at checkout, but in general, the following shipping times apply:
 
Standard Delivery
Main centres:  1-3 business days
Regional areas: 3-4 business days
Remote areas: 3-5 business days
Buyer protection
Get it now, pay later

Product details

Condition
New
Location
South Africa
Product code
8418480423229
Bob Shop ID
590344971

ECCO Inverter and Battery Combo 5.5KVA Solar Hybrid Inverter & 4.8KWH Lithium Battery

The main difference between PWM and MPPT charge control devices is that the MPPT devices are more efficient. MPPT charge control devices have 30 % more efficient in charge efficiency according to PWM type. Panel voltage and battery voltage should be matched in PWM systems.

ECCO Hybrid Inverter Specifications:

  • High Voltage VDC500V
  • 5.5KVA/5500W 100A Pure Sine Wave Solar Inverter


ECCO Hybrid Inverter Features:

  • Pure Sine Wave Solar Inverter
  • Output Power Factor 1
  • High PV Input Voltage Range (120VDC - 500VDC)
  • Built-in 100A MPPT Solar Controller
  • Supports Multiple Output Priority: UTL, SOL, SBU, SUB
  • Parallel Operation with Up to 12 units (Parallel Version)
  • Supports Parallel Operation in Single Phase/ 3 Phase (Parallel Version)
  • Supports Wireless Parallel, Without Extra Sharing Current Cable
  • RS485 Communication for BMS
  • Wifi Monitoring
  • Battery Equalization Function to Optimize Battery Performance and Extended Lifecycle


Inverter Mode
- Rated Power: 5500VA / 5500W
- DC Input: 48VDC, 127A
- AC Output: 230VAC, 50/60Hz, 23.9A

AC Charger Mode
- AC Input: 230VAC, 50/60Hz, 40A
- DC Output: 54VDC
- Max. Charge Current(AC): 60A Default 30A
- Max. Charge Current(PV+AC): 100A
- AC Output: 230VAC, 50/60Hz, 23.9A

Solar Charge Mode
- Max. PV Array Power: 5500W
- Min. Solar Voltage: 120VDC
- Max. Solar Voltage (VOC): 500VDC
- Max. MPPT Charge Current: 100A

Ingress Protection: IP21 (Indoor Use)

Dimensions ; 38 x 55 x 20 cm
Weight : 9.65kg

It is recomended to use ECCO Batteries and Solar Panels for Quality Garanteed Results.

Important Note: This product requires installation by a qualified PV installer, the PV installer must be able to issue a Certificate of Compliance. This is to ensure that the installation is safe and correct, as well as, within the scope of relevant regulations.

What's in the box
1 x ECCO 5.5KW Inverter
1 x Wifi Monitoring Module
3 x Connecting Cables
1 x User Guide

Battery Specifications:

This Battery comes in a Rack Mount Cabinet or can be wall mounted. Ideal for Invertor and Solar Installations.

51.2v Voltage
100ah
3000 Cycle Life / 20 Year
Ip31 Ip Class
With Display Screen
Long Life Span
Lithium-Ion Phosphate
Lighter weight and higher power

What's in the box
1 x Ecco Lithium Ion Phosphate 48v 100ah Battery

Warranties:

3000 cycles / 5 years

Combo includes:

  • 1x Ecco Lithium Ion Phosphate 48v 100ah Battery (5 Years Warranty)
  • 1x Hybrid Inverter 48V 5.5 KVA 5500W MPPT 100A Inverter Pure Sine Wave - Ecco(5 Year Repair Warranty)
  • Warranties:
    All inverters and batteries must be installed by a qualified electrical wireman or Master electrician with a valid registration with the Department of Labour. A valid electrical certificate of compliance (COC) must be issued once installed, specific to the installation of the backup or solar system. The installation must be compliant with SANS 10142 and ALL its parts. Any warranty claim submitted without installation photos, a valid COC and proof of a qualified wireman/master electrician installing the unit, can be rejected and will render the warranty claim null at void.