EleksMaker A3 Pro Violet Laser Cutter Main Features:● Maximum engraving area: 30cm x 38cm● Control board: Eleks Mana SE ● Carving materials: bamboo, wood, paper, plastic, leather, etc.● Power supply: AC 110 - 220V● Adjustable laser focus● Support Micro USB ● Stepper motor: 1.3A 42 stepper motor, Y-axis dual track ● Stainless steel and acrylic acid frame is stable and pretty● It is an unfinished DIY kithttps://download.appinthestore.com.s3.amazonaws.com/201612/%E5%B7%A5%E5%85%B7/drive.zipTips:
Laser machine installation, software downloading, software setting ,operating instructions and FAQ:
https://wiki.eleksmaker.com/doku.php?id=elekslaser_a3_pro
Note(Please pay attention):
1. Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin!
2. The red cord is DC12v(+),black cord is GND(-), yellow cord is signal(S). Please make sure you know the wire position and connect
to the ManaSE board correctly!
3. The warranty period of laser module is one month. If you have any quality problem(Except individual situation like using the laser
module more than 30 minutes per time and casue the damage ), please feel free to ask our customer service for a help.
4. If your laser module has any problem, please DO NOT dismantle it without our permission. It will destroy the laser module.
5. If you have any quality problem about the machine, please feel free to contact us. Many operative problem can be solved according
to your video and problem description. Thank you in advance.
Package List:
1 Set x 500mW Laser Engraving Machine (Need to be assembled by you)
FAQ:
1. How to assemble the kit?
The whole assemble and operating manual link is here:Click here
You can also watch the video to do it:Click here
2. What software can support this machine? And what image format? Engrave Mode?
Supported Software: EleksCam（wiki.eleksmaker.com/doku.php?id=elekscam）T2-Laser, Benbox，
（wiki.eleksmaker.com/doku.php?id=benbox），GrblController, LiteFire, Laser GRBL, etc.
Supported Image Format: jpg, bmp, svg, G-code
Supported Engrave Mode: Photo, Word, Scan, Outline, Pixel Laser Engraving
3. What system can the EleksCAM support?
PC Windows XP/7/8/10 , Laptop is ok,too.
4. My laser doesn't work, what should I do?
If the machine does not work, it might because:
① The wire connection is wrong.Please check the connection like the picture shown.
② Your computer could not support the software.Please use Win XP 7/8/10 to check it.
③ Software problem.Please check whether wires are inserted rightly. And then check your data setting.
④ The kit misses some accessories.Please compare with the instruction and tell us, we will solve it once you send us the email.
⑤ Laser module/ driver board/power supply is broken.Please check which part is the main problem,and then send us a video to prove it.
Or you can send us a video about your software setting,working laser and driver board. We will ana
