Injector Tester Fuel Injector Tester Fuel System Scan Tool Gasoline Injector Tester Automotive DIY

This injector tester can be used to help identify stuck, leaked or burned out conditions,it uses 12V vehicle battery for power.Large LED display\/4 Pulse Modes. Test Lead: 41.5cm \/ 16.3 inches.It can work with any fuel pressure tester, easily to clean most car motorcycle fuel injectors.It will help us clean and test the injectors of gasoline cars and motorcycles.The engine of the car must be turned off before using this instrument.Name:Injector Tester Fuel Injector TesterPower Supply:12V Car BatteryApplicable Models:All ModelsOperation Environment:0-40,relative humidity Less than 80%Storage Environment:-20-50,relative humidity Less than 85%Explanations for 4 modes:Mode 1:the tester outputs 1 pulse,whose pulse width is about 255msMode 2:the tester outputs 50 pulse,every pulse's pulse width is about 7msMode 3:the tester outputs 100 pulse,every pulse's pulse width is about 3.5msMode 4:the tester outputs pulse continuously at the rate of 50 pulses per about 1450ms,every pulse's pulse width is about 7msOperation Instructions:Turn off the vehicle's engineConnect Black\/Red Clip to the Negative\/Positive terminal of batteryConnect pulse output terminal to the fuel injectorPress the \SELECT\ key to select the desired pulse mode,and use knob to turn up or down the Frequency or widthPress the \START\ key,the tester will output pulse to the injector,and then the pulse signalindicator will light as indicationTips:The product may be updated constantly,The Actual Product May Have Slight Differences Or Color Differences the color and appearance may be changed,please don't mind.And take a consideration before place the order if you have request for color or appearance.Colour:As ShownMaterial:PlasticPackage Contents:1 *Fuel Injector Tester2 * connectorsOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.