Mission M32 bookshelf speakers

Please TAKE Note:    

These speakers are sold as a used set & are 100% working                                           

The Pic is of the  actual speakers listed

There is some cosmetic damage on the top left side of the left(pic) speaker box. 

There are some light scratches on the tops of the speaker boxes.

The Mission m32 is a stand-mount loudspeaker ideally suited to the Mission Stancette stand.  Similar to the m31
but with a larger 165mm DiaDrive bass unit, the m32 provides deeper bass extension and impressive midrange
performance.  The curved profile to the 30mm thick front baffle optimises dispersion and provides a rigid frame for
the drive units in conjunction with the strongly braced 18mm MDF cabinet construction. To match the outstanding performance of the new DiaDrive bass unit, a lightweight, Viotex fabric dome treble unit handles high frequencies up to an ultrasonic 28kHz. The trueanalysis of this extended bandwidth can be found in the sweetness, clarity and detail resolution that only comes
from a drive unit that pushes distortion products beyond the limits of audibility.

construction
Enclosure 30 and 18mm MDF
Grille Acoustically transparent cloth
Damping  Long hair fibre
electrical
L.F. Unit 165mm DiaDrive 
H.F. Unit 25mm Viotex soft dome with FF cooling
Crossover Acoustic 2nd order
Terminals Gold plated Multi-way binding posts

specifications
Enclosure type 2-way reflex loaded
In-room Frequency Bandwidt
h -6dB at 48Hz and 28kHz
Frequency response ±3dB 52Hz — 20 kHz
Nominal Impedance
8 Ohms compatible
 (min. 4ohms)
Sensitivity SPL/m/2.83v 90dB
Recommended amplifier power 25 - 100W
Crossover frequency 2.8 kHz
Effective volume 12.4 litres
Cabinet dimensions (HxWxD) 320 x 200 x 325
(mm), 12.6 x 7.9 x 12.8
(inches)
Weight 7.0 Kg, 15.5 lbs. (per speaker cabinet)
Finish  Cherry

setting up
RUN IN for at least 24 hours before serious listening.
Use Mission Stance stands for optimum performance.
Position within 20cm — 50cm of rear wall.
Use good quality speaker cables.