

Generic replacement wireless infrared remote control for the Nikon ML-L3, looks and functions the same, at a fraction of the cost :
It can trigger the camera shutter release remotely from a distance. The compatible camera has a built-in infrared receiver for this remote trigger device.
It has been proved to be safe and reliable with the multi-brand cameras (see more details in the picture above), and works with all camera remote control modes (Quick-response, Delayed and Bulb). It can be easily attached to your camera belt. Works from up to 8 meter (25 feet) away.
Dimensions: 60x28x6.8mm
Suitable for the following Nikon SLR's:
Nikon DSLR D70 D70s D50 D40 D40x D60 D80 D90 D5000 D3000,
Nikon Coolpix 8800/8400,
Nikon SLR F75 F65 F55 N65 N75
Instructions for use :
1.For the first time use. please pull out the plastic separator at the battery holder.
2.Mount the camera on a tripod or place the camera on a stable, level surface.
3.Press the button and rotate main command dial until(delayed remote) or(quick response remote)is displayed in the control panel.
4.Aim the transmitter on the remote control at the infrared receiver on the camera (usually within +/-30 degree of the lens axis, from the left to the right and from the top to the bosom) and press the shutter-release button on the remote control (when using the remote outdoors,make sure that the subject is not backlit and that the line of site between the transmitter and the infrared receiver is not blocked by the lens or other obstacles).
5.How the camera focuses and shoots depends on the option selected camera's custom setting.For futher information,check your camera's manual.
6.Infrared cannot be seen by human eyes. So you will see no visible light from the LED on the front end of the remote control when operating.
7.Battery : CR2025.
ONLY USES 